Victron Energy SmartSolar MPPT 100/50 Charge Controller

The MPPT controller is a sophisticated way to harvest the maximum power from a solar array. It adjusts its input voltage to the optimal level for maximum power production. It decouples the solar array voltage from the battery voltage so that a 48 volt panel can power a 24 volt battery bank Ultra-fast Maximum Power Point Tracking (MPPT) Advanced Maximum Power Point Detection in case of partial shading conditions Automatic battery voltage recognition for 12 or 24 volt banks Up to 100 Volts input, rated for 50 Amps output For use with up to 700 Watts of panels in a 12 volt system or 1400 Watts in a 24 volt system Provides three stage temperature compensated charging with a flexible charge algorithm Over-temperature protection and power de-rating when temperature is high. FAQ How many panel Watts can this charge controller support This charge controller can handle 700 Watts of solar if your battery is 12 Volts and 1400 Watts if your battery is 24 Volts. What happens if my panel voltage is different than my battery voltage This charge controller can handle up to a maximum of 100 Volts from the panels even though the battery voltage is only 12 or 24 Volts. The panel voltage must be at least 5 volts above battery voltage. Does this charge controller have Bluetooth Yes Bluetooth is built in and is accessed using the free Victron Connect app on your phone or tablet. The app can be downloaded from the Apple or Android stores and you can try it out in demo mode. Will this work with lithium batteries This charge controller is fully programmable using the Victron Connect Bluetooth app on your phone. There is a pre-programmed option for Lithium batteries.