Matek F405-WING Flight Controller

Mateks F405-Wing is the premier flight controller made specifically for FPV wing aircraft. Loaded with an array of features and tons of room for peripherals, this board lets you choose how you want to fly. INAV OSD, Blackbox, VCP and 6 UARTS, room for 2 motors and 7 servo outputs, 4 BEC and more. It might be easier just to read the spec sheet. - Specifications MCU: 168MHz STM32F405 IMU: MPU6000 accelerometer/gyro (SPI) Baro: BMP280 (I2C) OSD: INAV OSD w/ AT7456E chip Blackbox: Micro - SD card slot (SD/SDHC) VCP & 6x UARTs 2x Motors, 7x Servos outputs 2x I2C 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red) Built in inverter for SBUS input (UART2-RX) PPM/UART Shared: UART2-RX Soft - Serial on TX2 pad Battery Voltage Sensor: 1:10 (Scale 1100) WS2812 Led Strip : Yes Beeper : Yes RSSI: Yes FC Firmware INAV Flight Target: MATEKF405SE PDB Input voltage range: 9~30V (3~6S Li - Po) w/TVS protection 2x ESC power pads Current Senor: 104A, 3.3V ADC, Scale 317 BEC 5V output Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, Air - Speed Continuous current: 2 Amps, Max.3A BEC 9V /12V output Designed for Video Transmitter, Camera, Gimbal ect. Continuous current: 2 Amps, Max.3A 12V option with Jumper pad BEC Vx output Designed for Servos Voltage adjustable, 5V Default, 6V or 7.2V via jumper Continuous current: 5 Amps, Max.6A Output Ripple: 50m - V (VIn=24V, VOut=5V@5A load) BEC 3.3V output Designed for Baro / Compass module and Spektrum RX Linear Regulator Continuous current: 500m - A Physical Mountin 30.5 x 30.5mm, ??4mm with Grommet